power entry modules with line filter grf2 www.schurter.com/pg0 6 emc products iec appliance inlet c14 with shielding, "lock and shield" mounting grf2: only with shield, without line filter c14 70 c description - panel mount: snap-in version from rear-side - 2 functions: appliance inlet protection class i, with emc-shield approvals - vde certificate number: 40025743 - ul file number: e96454 - csa file number: 38456 characteristics - time saving lock and shield snap-in design for rear-panel mounting - all single elements are already wired - innovative emc-shielding with flexible steel segments for an excellent contact to the panel - qualified for use in equipment according iec/en 60950 other versions on request - with solder terminals references alternative: version with line filter weblinks pd f , general product informatio n , approval s , roh s , china-roh s , mating connector s , e-stor e , schurter-stock-chec k , distributor- stock-chec k , accessorie s technical data ratings iec 10 a @ ta 40 c / 250 vac; 50 hz ratings ul/csa 15 a @ ta 40 c / 125 vac; 60 hz dielectric strength > 1.7 kvdc between l-n > 2.7 kvdc between l/n-pe test voltage (2 sec) allowable operation temp. -25 c to 85 c climatic category 25/085/21 acc. to iec 60068-1 degree of protection from front side ip 40 acc. to iec 60529 protection class suitable for appliances with protection class 1 acc. to iec 61140 terminal quick connect terminals 4.8 x 0.8 mm plug connector solder terminal on request panel thickness s snap-in: 1.2/1.5/2 mm material: housing thermoplastic, black, ul 94v-0 appliance-inlet/-outlet c14 acc. to iec/en 60320-1, ul 498, csa c22.2 no. 42 (for cold conditions) pin-temperature 70 c, 10 a, protection class 1 mtbf > 3'300'000 h acc. to mil-hb-217 f dimensions grf2 s max.29 4.8 22.6 m4 +0.2 8.8 22.9 47.5 0.1 1) 1) terminal for earth screw m4 1) 1) terminal for earth screw m4 30.5 20.8 m4 0.1 0.1 max. r1.5 22.9 this area must be conductive for optimal shielding. do not apply paint or coatings.
2 power entry modules with line filter grf2 www.schurter.com/pg0 6 emc products dimensions step 1 place the socket in top edge of the panel cut-out. step 2 push the socket upwards. step 3 push the socket forward into the panel cut-out. step 4 release the socket. the component is self adjusting. variants rated current iec [a] rated current ul [a] filter-type panel thickness s [mm] additional ground terminal order number 10 15 without 1.2 - grf2.0212.11 10 15 without 1.5 - grf2.0215.11 10 15 without 2 - grf2.0220.11 10 15 without 1.2 quick connect terminal 4.8 x 0.8 grf2.0312.11 10 15 without 1.5 quick connect terminal 4.8 x 0.8 grf2.0315.11 10 15 without 2 quick connect terminal 4.8 x 0.8 grf2.0320.11 packaging unit 100 pcs mating outlets/connector s category / description appliance outletoverview complet e iec appliance outlet f, screw-on mounting, front side, solder terminal 478 7 iec appliance outlet f, snap-in mounting, front side, solder or quick-connect terminal 478 8 iec appliance outlet f or h, screw-on mounting, front side, solder, pcb or quick-connect terminal 509 1 iec appliance outlet f or h, screw-on mounting, front side, solder or quick-connect terminal 509 2 appliance outletfurther types togrf 2 connectoroverview complet e iec connector c15, rewireable, straight 010 1 iec connector c15a, rewireable, straight 010 2 iec connector c15a, rewireable, straight 0102- g iec connector c15a, rewireable, angled 011 2 iec connector c13, rewireable, angled 401 2 connectorfurther types togrf 2 ... power cordoverview complet e power cord with iec connector c13, angled 031 1 power cord with iec connector c13, angled 301 1 power cord with iec connector c13, angled 301 2 power cord with iec connector c13, angled 301 3 power cord with iec connector c13 302 0 power cordfurther types togrf 2 ...
power entry modules with line filter grf2 www.schurter.com/pg0 6 emc products the specifications, descriptions and illustrations indicated in this document are based on current information. all content is subject to modifications and amendments.
|
